Tension Box

 

DSC00042

A home-built tension box came with this loom.  Half inch oak plywood sides are joined by 3/4″ (i.d.) galvanized pipe.  The pipe is secured by driving in the nuts from 1/2″ bolts into the ends of the pipe and then secured to the plywood from the outside with 1/2″ bolts and washers (1/2″ nuts have a diametre slightly larger than 3/4″).  There are eight pipes on the top level and two on the lower level and mounts for reeds at either end.  It is well built.  Today I disassembled it and cleaned it, steel wooling the pipe, sanding all wood, and routing a finished edge onto the plywood.  Then I oiled it with linseed oil.  I will give some thought to what sort of legs I want on it.  I am very pleased with this result…

DSC00015

DSC00016

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s